Aşağıdaki kodu Notepada kopyalayıp 0C_054D.GSD adında kaydedin.<br />
<br />
<br />
<br />
<br />
;******************************************************************************* <br />
;** ** <br />
;** Omron Europe B.V. ** <br />
;** ** <br />
;** European Headquarters ** <br />
;** Wegalaan 67-69 ** <br />
;** NL-2132 JD Hoofddorp ** <br />
;** The Netherlands ** <br />
;** ** <br />
;** European Technical Centre ** <br />
;** Zilverenberg 2 ** <br />
;** NL-5234 GM 's-Hertogenbosch ** <br />
;** The Netherlands ** <br />
;** ** <br />
;******************************************************************************* <br />
;** ** <br />
;** Device DataBase File for CQM1-PRT21 PLC I/O Slave ** <br />
;** ** <br />
;** Filename: OC_054D.GSD ** <br />
;** Version : 1.0 ** <br />
;** Date : February 23, 2000 ** <br />
;** ** <br />
;** &copy; Copyright OMRON Corporation 1998, 1999 ** <br />
;** All Right Reserved ** <br />
;** ** <br />
;******************************************************************************* <br />
;** ** <br />
;** Important notice: ** <br />
;** ================== ** <br />
;** - Any modification of parameters in this file may lead to undefined ** <br />
;** behavior of the Profibus-DP system. ** <br />
;** ** <br />
;******************************************************************************* <br />
;** ** <br />
; General information *********************************************************/ <br />
; <br />
#Profibus_DP ; <br />
GSD_Revision = 1 ; GSD file revision 1.0. <br />
; <br />
Vendor_Name = "OMRON Corporation" ; Vendor name string. <br />
Model_Name = "CQM1-PRT21" ; Model type string. <br />
Ident_Number = 0x054D ; PNO Identification number. <br />
; <br />
FMS_supp = 0 ; Profibus-FMS not supported. <br />
Protocol_Ident = 0 ; Profibus-DP supported. <br />
Station_Type = 0 ; Station = DP-Slave. <br />
Slave_Family = 10 ; Slave family = 10 (PLC). <br />
; <br />
Revision = "V1.0" ; Device revision 1.0. <br />
Hardware_Release = "V1.0" ; Hardware revision 1.0. <br />
Software_Release = "V1.0" ; Software revision 1.0. <br />
; <br />
Bitmap_Device = "OC054D_R" ; Bitmap RUNNING <br />
Bitmap_Diag = "OC054D_D" ; Bitmap DIAGNOSTIC <br />
Bitmap_SF = "OC054D_S" ; Bitmap SPECIAL <br />
; <br />
; Specific implementation information *****************************************/ <br />
; <br />
Implementation_type = "SPC3" ; Siemens SPC3 ASIC used. <br />
Redundancy = 0 ; Redundancy NOT supported. <br />
Repeater_Ctrl_Sig = 2 ; Supported, TTL level <br />
24V_Pins = 0 ; No external 24 Volt input. <br />
; <br />
Set_Slave_Add_supp = 0 ; Station address is set <br />
; through hardware address <br />
; selectors. <br />
; Media access information ****************************************************/ <br />
; Automatic baud rate select <br />
Auto_Baud_supp = 1 ; (SPC3 specific feature). <br />
; Supported baud rates: <br />
9.6_supp = 1 ; 9600 Baud <br />
19.2_supp = 1 ; 19.2 kBaud <br />
45.45_supp = 1 ; 45.45 kBaud <br />
93.75_supp = 1 ; 93.75 kBaud <br />
187.5_supp = 1 ; 187.5 kBaud <br />
500_supp = 1 ; 500 kBaud <br />
1.5M_supp = 1 ; 1.5 MBaud <br />
3M_supp = 1 ; 3 MBaud <br />
6M_supp = 1 ; 6 MBaud <br />
12M_supp = 1 ; 12 MBaud <br />
; Max. response times: <br />
MaxTsdr_9.6 = 60 ; 60 Tbit = 6.25 msec. <br />
MaxTsdr_19.2 = 60 ; 60 Tbit = 3.125 msec. <br />
MaxTsdr_45.45 = 250 ; 250 Tbit = 5.50 msec. <br />
MaxTsdr_93.75 = 60 ; 60 Tbit = 640 usec. <br />
MaxTsdr_187.5 = 60 ; 60 Tbit = 320 usec. <br />
MaxTsdr_500 = 100 ; 100 Tbit = 200 usec. <br />
MaxTsdr_1.5M = 150 ; 150 Tbit = 100 usec. <br />
MaxTsdr_3M = 250 ; 250 Tbit = 83 usec. <br />
MaxTsdr_6M = 450 ; 450 Tbit = 75 usec. <br />
MaxTsdr_12M = 800 ; 800 Tbit = 67 usec. <br />
; <br />
Min_Slave_Intervall = 5 ; Minimum slave interval = <br />
; 0.5 msec. <br />
; <br />
; DP-slave information ********************************************************/ <br />
; <br />
Freeze_Mode_supp = 1 ; Freeze mode supported. <br />
Sync_Mode_supp = 1 ; Sync mode supported. <br />
Fail_Safe = 1 ; Fail safe supported. <br />
; <br />
Modular_Station = 1 ; Modular station. <br />
Max_Module = 1 ; Maximum # of modules: 1. <br />
; <br />
Max_Input_Len = 16 ; Maximum # of input bytes. <br />
Max_Output_Len = 16 ; Maximum # of output bytes. <br />
Max_Data_Len = 32 ; Maximum # of data bytes. <br />
; <br />
Max_Diag_Data_Len = 6 ; Maximum diagnostic length. <br />
; <br />
; <br />
; User parameter message definition *******************************************/ <br />
; Preset parameterization <br />
User_Prm_Data_Len = 3 ; message length and default <br />
; message. <br />
User_Prm_Data = 0x40,\ ; Mandatory additional user <br />
0x00,\ ; parameters. <br />
0x00 ; <br />
; <br />
; <br />
; Module definition list ******************************************************/ <br />
; I/O definitions: <br />
Module = " 2 words In/Out" 0x71 ; 2 words I/O. <br />
EndModule ; <br />
Module = " 4 words In/Out" 0x73 ; 4 words I/O. <br />
EndModule ; <br />
Module = " 6 words In/Out" 0x75 ; 6 words I/O. <br />
EndModule ; <br />
Module = " 8 words In/Out" 0x77 ; 8 words I/O. <br />
EndModule ; <br />
; <br />
; <br />
; End of GSD file *************************************************************/